Multilayer plastic materials are ubiquitous in food and medical supply packaging, particularly since the specific properties of layered polymers can keep moisture from fouling sterile syringes or light and oxygen from making potato chips stale. But despite their utility, those ever-present plastics are impossible to recycle using conventional methods.
About 100 million tons of multilayer thermoplastics — each composed of as many as 12 layers of varying polymers — are produced globally every year. Forty percent of that total is waste from the manufacturing process itself, and because there has been no way to separate the polymers, almost all of that plastic ends up in landfills or incinerators.
Now, University of Wisconsin–Madison engineers have pioneered a method for reclaiming the polymers in these materials using solvents, a technique they’ve dubbed Solvent-Targeted Recovery and Precipitation (STRAP) processing. Their proof-of-concept is detailed today (Nov. 20, 2020) in the journal Science Advances.
By using a series of solvent washes guided by thermodynamic calculations of polymer solubility, UW–Madison professors of chemical and biological engineering George Huber and Reid Van Lehn and their students used the STRAP process to separate the polymers in a commercial plastic composed of common layering materials polyethylene, ethylene vinyl alcohol, and polyethylene terephthalate.
The result? The separated polymers appear chemically similar to those used to make the original film.
The team now hopes to use the recovered polymers to create new plastic materials, demonstrating that the process can help close the recycling loop. In particular, it could allow multilayer-plastic manufacturers to recover the 40 percent of plastic waste produced during the production and packaging processes.
“We’ve demonstrated this with one multilayer plastic,” says Huber. “We need to try other multilayer plastics and we need to scale this technology.”
The goal is to eventually develop a computational system that will allow researchers to find solvent combinations to recycle all sorts of multilayer plastics.
As the complexity of the multilayer plastics increases, so does the difficulty of identifying solvents that can dissolve each polymer. That’s why STRAP relies on a computational approach used by Van Lehn called the Conductor-like Screening Model for Realistic Solvents (COSMO-RS) to guide the process.
COSMO-RS is able to calculate the solubility of target polymers in solvent mixtures at varying temperatures, narrowing down the number of potential solvents that could dissolve a polymer. The team can then experimentally explore the candidate solvents.
“This allows us to tackle these much more complex systems, which is necessary if you’re actually going to make a dent in the recycling world,” says Van Lehn.
The goal is to eventually develop a computational system that will allow researchers to find solvent combinations to recycle all sorts of multilayer plastics. The team also hopes to look at the environmental impact of the solvents it uses and establish a database of green solvents that will allow them to better balance the efficacy, cost and environmental impact of various solvent systems.
The project stems from UW–Madison’s expertise in catalysis. For decades, the university’s chemical and biological engineering researchers have pioneered solvent-based reactions to convert biomass — like wood or agricultural waste — into useful chemicals or fuel precursors. Much of that expertise translates into solvent-based polymer recycling as well.